| Specifications of Coriolis Mass Flow Meter |
| Model No. | CG-80 |
| Max. flow rate | 3000kg/min |
| Nominal diameter | 80mm( 3 inch) |
| Mass accuracy grade | 0.2 |
| Zero stability | 0.115kg/min |
| Repeatability | 0.02% |
| Warranty | 2 years |
| Temperature accuracy | ±1°C |
| Fluid temperature | -200~200°C |
| Wetted parts | Stainless steel 316L |
| Sensor housing | Stainless steel 304 |
| Packing | 1set/wooden case |
| Package size | 1340*1300*1000mm |
| G.W. | 125kgs |
Specifications of Coriolis Mass Flow Sensor
| Specifications of Coriolis Mass Flow Sensor |
| Gas accuracy | ±0.5% for mini flow, ±0.1% for high flow |
| Liquid accuracy | ±0.2% for mini flow, ±0.1% for high flow |
| Temp. accuracy | ±1°C |
| Pressure drop | ≤0.2MPa |
| MWP | 4MPa |
| Temp. rating | -50°C~+200°C |
| End connection | Customizable |
| Ex-mark | Ex[ib]IIBT1~T6 Gb / Ex[ib]IICT1~T6 Gb |
Specifications of Coriolis Mass Flow Transmitter
| Specifications of Coriolis Mass Flow Transmitter |
| Temp. rating | -20°C~+50°C |
| RH | ≤95%, non condensed |
| Atmospheric pressure | 86~106KPa |
| Operating voltage | AC85~265V, DC12~28V |
| Communication port | RS485 Modbus RTU |
| Ex-proof grade | Exd[ib]IIBT4Gb |
| Model No. | Diameter (mm) | Max. flow rate (kg/min) | MWP. (MPa) | Accuracy grade | Zero stability (kg/min) |
| CG-06 | 06 | 18 | 4 | 0.2 | 0.003 |
| CNG-15/CG-15 | 15 | 70/50 | 25 | 0.2 | 0.009 |
| CG-25 | 25 | 200 | 4 | 0.2 | 0.017 |
| CG-50 | 50 | 1000 | 4 | 0.2 | 0.038 |
| CG-80 | 80 | 3000 | 4 | 0.2 | 0.115 |
| CG-100 | 100 | 5000 | 2.5 | 0.2 | Under development |
Introduction of Coriolis mass Flow Meter
Mass flow meter consist of mass flow sensor and mass flow transmitter. It does not measure the volume per unit time (e.g., cubic meters per second) passing through the device, but measures the mass per unit time (e.g., kilograms per second) flowing through the device. The result of volumetric meter varies with temperature, pressure, composition, etc., but mass flow meter does not have such problem.
Operating principle of Coriolis mass flow meter
Mass flow meter is designed according to Coriolis Effect. The inlet arm and the outlet arm vibrate with the same frequency as the overall vibration, but when there is mass flow the two vibrations are out of sync: the inlet arm is behind, the outlet arm is ahead. The two vibrations are shifted in phase with respect to each other, and the degree of phase-shift is a measure for the amount of mass that is flowing through the tubes.
Feartures:
*Reduced filling time with higher flow rate capacity
*Compact design with no moving parts, no special mounting and no flow conditioning required
*Fast delivery and global support
Applications of Coriolis mass flow meter
Sealand Coriolis Flow Meter family measures direct mass flow rates of liquids and gases in virtually all applications without special calibration. Safety, reliability, quality, and our innovative technologies enables us to provide a broad range of industry-specific products and services — and the expertise to put them to work for you.
- Alternative Energy
- Oil & Gas
- Chemical
- Food & Beverage
- Industrial Energy
- Life Sciences
- Marine
- Metals and Mining
- Power
- Pulp & Paper
- Refining
- Water & Wastewater
- Others
Dimension of Coriolis mass flow meter
Advantages of Coriolis mass flow meter
1. High reliability
2. It requires low maintenance, because of no movable parts.
3. High accuracy: Generally, it is from 0.15%-0.3%.
4. It is not affected by the fluid, saving the design & installation cost.
5. It shows many parameter simultaneously, such as mass flow, temperature, density, etc.
6. Convenient installation: Generally, there is no specific requirement of choosing upstream or downstream pipe.
7. Wide application: Besides the common fluid, the Mass Flowmeter can measure other industrial media, such
as non-Newtonian fluid, all kinds of slurry, suspensions, etc.
Installation of Coriolis mass flow meter
It is highly recommended to install as follows, for different fluid.
Production facility of Coriolis mass flow meter
Packing of Coriolis mass flow meter
Mass production of Coriolis mass flow meter
Certificates of Coriolis mass flow meter
Sealand profile
Zhejiang Sealand Technology Co. Ltd. is a professional hi-tech enterprise, founded in 2009 with 45 million CNY registered capital. Located in Binhai ETDZ, Wenzhou, the factory covers an area of 4000m2, equipped with advanced production and test facilities. Sealand is a professional manufacturer of Coriolis mass flow meter, CNG mass flowmeter, mass flow meter, Coriolis Mass Flowmeter, Coriolis Meter , Coriolis flow meter.
Why Sealand?
1. Sealand is professional, with senior engineers from the first research team in this field in China, and junior one from college, to keep improving.
2. Sealand is experienced. It started to research and develop in 1990. All employees are stable here; even the production-line workers have worked here for more than 5 years.
3. Sealand mass flowmeter can be used in many fields, with a flowrate from 0 to 5000kg/min, and the connection ends are customizable.
4. Sealand strictly controls the quality from raw material to finished products, and all products will be inspected and tested for 3 times before shipment.
Contact Now
